Install a bathtub with an apron set
A tub with an apron set between three walls; connect drain/overflow and shower, set in mortar, attach the flange, caulk. Minimal carpentry; wall tile/finishing goes separately.
$120per itemInstall a Drop-In Bathtub
Install a Drop-In Bathtub: A tub that drops into a framed deck/platform; build/level the deck, waterproof, cut opening, set tub, plumb.
$700per itemInstall a Free Stand Bathtub
A stand-alone tub on finished floor; align/move floor drain under tub, set/level/secure, connect to floor- or wall-mounted filler. No surround; may need drain relocation or floor reinforcement for heavy tubs.
$889per item
Inspect Leak/Source of smell
Investigate and pinpoint the source of water leaks or odors—check fixtures, drains, traps, and vents with moisture testing - then provide a clear repair plan.
$150per jobUnclog a Tub
Use a drain snake to clear hair and soap buildup from your bathtub drain (through the stopper/overflow), restore proper flow, and test - no harsh chemicals.
$200per jobUnclog a Shower
Use a drain snake to clear hair and soap buildup from your shower drain, restore proper flow, and flush/test - no harsh chemicals.
$200per jobUnclog a Toilet
Clear toilet clogs with a professional auger (snake), remove the blockage without chemicals, and verify with a flush test.
$200per jobUnclog a Sink
Use a drain snake to clear sink clogs through the P-trap or cleanout, remove grease/food blockages, and restore proper flow (no harsh chemicals).
$315per jobInspect Main drain camera
Inspect the main drain with a video camera via a cleanout to locate blockages, roots, or damage, record footage, and mark depth/distance.
$315per jobBack-Up Pump with a battery (parts and labour included)
Supply and install a battery-backup sump pump system (pump, battery, charger, check valve), integrate with your existing pit and test - parts and labour included.
$1700per jobReplace Sump Pump (labour only)
Replace your existing sump pump with your supplied unit: disconnect old, connect to the existing pit/discharge line and check valve, set the float, and test - labour only (no parts).
$300per job
Install / replace a Hand Sink Single Handle Faucet
Install or replace a single-handle hand-sink faucet, connect to existing shutoff valves and pop-up (if included), and test for leaks.
$200per itemInstall / replace a Hand Sink Three Piece Faucet
Install or replace a 3-piece sink faucet (two handles + spout), connect to existing shut-offs/supply lines, set the drain/stopper if included, and test for leaks.
$250per itemInstall / replace a Bathtub Shower Faucet
Install or replace a bathtub/shower faucet, connect to existing plumbing (or replace the valve if needed), and test for leaks.
$500per itemInstall / replace a Bathtub Free Stand Faucet
Install or replace a freestanding bathtub filler faucet - mount to the floor bracket, connect to existing hot/cold rough-ins (and hand shower if included), secure, and test for leaks/flow.
$600per item
Install a Shower Panel
Install a wall-mounted shower panel to existing hot/cold lines - securely mount, connect, seal, and test all functions (rain head, wand, jets).
$500per itemInstall a Shower Base
Install a prefabricated shower base - level on mortar, connect to the existing drain, secure and waterproof the flange, and seal the perimeter.
$550per item
Install a New Main Shut-Off Valve ½”
Install a new ½″ main shut-off ball valve at the water entry—shut off and drain the line, cut in and connect (copper/PEX as needed), restore water, and leak-test.
$300per itemInstall a New Main Shut-Off Valve ¾”
Install a new ¾″ main shut-off ball valve at the water entry - shut off and drain the line, cut in and connect (copper/PEX as needed), restore water, and leak-test.
$350per item
Install a Kitchen Sink
Install a kitchen sink or hook up an existing sink to the drains - set and seal the strainer, connect the P-trap and dishwasher/disposal (if present), and leak-test.
$350per itemInstall a Double Sink
Install a double-bowl kitchen sink or hook up an existing one - seal dual strainers, add a baffle tee and P-trap, connect dishwasher/disposal if present, and leak-test.
$400per itemInstall a Floor Mounted Hand Sink with Cabinets
Install a floor-mounted hand sink with cabinet, or hook up an existing unit - by connecting hot/cold lines, setting the P-trap to the drain, leveling/securing, caulking, and leak-testing.
$325per itemInstall a Wall Mounted Hand Sink With Cabinets
Install a wall-mounted hand sink with cabinet, then mount it to blocking/bracket, connect hot/cold lines and P-trap to the drain, level/secure, caulk, and leak-test.
$700per item
Installation
Install or Replace a Floor-Mount Toilet
Remove the old unit (if present) and install a new floor-mount toilet on your existing flange and shutoff, with new wax ring/bolts, leveling and caulking, and leak/flush testing.
$189per jobInstall or Replace a Wall-Hung Toilet
Install or replace a wall-hung toilet using your existing in-wall carrier and tank - mount and level the bowl, connect waste/supply with new gasket/bolts, caulk as needed, and leak/flush test.
$490per itemInstall or Replace a Bidet Seat
Install or replace a bidet seat - mount the seat, add a T-valve at the shutoff, connect water and (if powered) a GFCI outlet, then test for leaks and spray.
$200per item